Home / Products  / Industrial Program / Wear protection
Wear protection
REMALINE High-quality rubber lining materials
REMALINE 25
Properties

  • Highly elastic and flexible
  • Noise damping
  • Wear resistant (round grains)


   Area of application

  • Sleeves for idlers
  • Lining of elevator and excavator buckets
  • Discharge hopper for dry mortar
  • Flexilo and hopper lining
  • Noise reduction lining
REMALINE 25/CN
Polymer
NR/IRDIN ISO 1629
Specific weight
0.98 g/cm³DIN EN ISO 1183
Hardness
33 ± 5 Shore AISO 868-2003 (DIN 53505)
Abrasion at 5 N
95 mm³DIN ISO 4649-2006
Resilience
75%ISO 4462-1986 (DIN 53512)
Roll length
10 m
Color
Black
Ref. No. Designation Dimensions Weight
5499025
REMALINE 25/CN3x 1 500 mm
3.09 kg/m²
5499000
REMALINE 25/CN6 x 2 000 mm
6.62 kg/m²
5494240
REMALINE 25/CN10 x 2 000 mm
11.20 kg/m²
5494264
REMALINE 25/CN12 x 2 000 mm
13.32 kg/m²
5494288
REMALINE 25/CN15 x 2 000 mm
16.20 kg/m²
5494295
REMALINE 25/CN20 x 2 000 mm
21.40 kg/m²
top
REMALINE 25/EP160/CN
Fabric reinforced
Polymer
NR/IRDIN ISO 1629
Specific weight
0.98 g/cm³DIN EN ISO 1183
Hardness
33 ± 5 Shore AISO 868-2003 (DIN 53505)
Abrasion at 5 N
95 mm³DIN ISO 4649-2006
Resilience
75%ISO 4462-1986 (DIN 53512)
Roll length
10 m
Color
Black
Ref. No. Designation Dimensions Weight
5494312
REMALINE 25/EP160/CN6 x 2 000 mm
7.20 kg/m²
5494350
REMALINE 25/EP160/CN8 x 2 000 mm
9.44 kg/m²
5494374
REMALINE 25/EP160/CN10 x 2 000 mm
11.40 kg/m²
5494398
REMALINE 25/EP160/CN12 x 2 000 mm
13.44 kg/m²
5494415
REMALINE 25/EP160/CN15 x 2 000 mm
16.50 kg/m²
top
REMALINE 35
Properties

  • Highly wear-resistant; especially resistant to wet abrasion
  • Highly elastic
  • Excellent self-cleaning capability


   Area of application

  • Sand and gravel industry
  • Slurry handling
  • Lining of slurry chutes, pipes, pumps, hydrocyclones, flotation cells, tanks and launders
  • Chutes / discharge hoses for ready-mixed concrete
  • Lining of excavator buckets to prevent caking (clay)
REMALINE 35/CN
Polymer
NRDIN ISO 1629
Specific weight
0.96 g/cm³DIN EN ISO 1183
Hardness
34 ± 5 Shore AISO 868-2003 (DIN 53505)
Abrasion at 5 N
110 mm³DIN ISO 4649-2006
Resilience
78%ISO 4462-1986 (DIN 53512)
Roll length
10 m
Color
Yellow
Ref. No. Designation Dimensions Weight
5490347
REMALINE 35/CN3 x 1 500 mm
3.66 kg/m²
5499220
REMALINE 35/CN5 x 2 000 mm
5.46 kg/m²
5490402
REMALINE 35/CN6 x 2 000 mm
6.90 kg/m²
5490440
REMALINE 35/CN8 x 2 000 mm
8.96 kg/m²
5490464
REMALINE 35/CN10 x 2 000 mm
11.00 kg/m²
5490488
REMALINE 35/CN12 x 2 000 mm
12.96 kg/m²
5490505
REMALINE 35/CN15 x 2 000 mm
16.20 kg/m²
5490529
REMALINE 35/CN20 x 2 000 mm
21.60 kg/m²
5490536
REMALINE 35/CN25 x 2 000 mm
26.50 kg/m²
top
REMALINE 35/EP160/CN
Fabric reinforced
Polymer
NRDIN ISO 1629
Specific weight
0.96 g/cm³DIN EN ISO 1183
Hardness
34 ± 5 Shore AISO 868-2003 (DIN 53505)
Abrasion at 5 N
110 mm³DIN ISO 4649-2006
Resilience
78%ISO 4462-1986 (DIN 53512)
Roll length
10 m
Color
Yellow
Ref. No. Designation Dimensions Weight
5490615
REMALINE 35/EP160/CN6 x 2 000 mm
7.08 kg/m²
5490653
REMALINE 35/EP160/CN10 x 2 000 mm
11.40 kg/m²
5490677
REMALINE 35/EP160/CN12 x 2 000 mm
13.44 kg/m²
5490691
REMALINE 35/EP160/CN15 x 2 000 mm
16.50 kg/m²
top
REMALINE 40 ORANGE
Properties

  • Resists wear, especially wear from wet abrasion
  • Highly elastic
  • Good self-cleaning capability


   Area of application

  • Sand and gravel industry
  • Slurry handling
  • Lining of slurry chutes, pipes, flotation cells, tanks and launders
REMALINE 40 ORANGE/CN
Polymer
NRDIN ISO 1629
Specific weight
1.02 g/cm³DIN EN ISO 1183
Hardness
40 ± 5 Shore AISO 868-2003 (DIN 53505)
Abrasion
140 mm³DIN ISO 4649-2006
Resilience
75%ISO 4462-1986 (DIN 53512)
Roll length
10 m
Color
Orange
Ref. No. Designation Dimensions Weight
5490873
REMALINE 40 ORANGE/CN3 1 x 5 00 mm
3.59 kg/m²
5490859
REMALINE 40 ORANGE/CN6 x 2 000 mm
6.80 kg/m²
5490804
REMALINE 40 ORANGE/CN10 x 2 000 mm
11.13 kg/m²
5490811
REMALINE 40 ORANGE/CN12 x 2 000 mm
13.23 kg/m²
5490828
REMALINE 40 ORANGE/CN20 x 2 000 mm
21.84 kg/m²
5490835
REMALINE 40 ORANGE/CN25 x 2 000 mm
27.04 kg/m²
top
REMALINE MP 40
Properties

  • Integrated replacement indicator
  • Orange wear protection layer
  • Black signal layer
  • Resists wear, especially in wet applications
  • Highly elastic
  • Good self-cleaning capability


   Area of application

  • Sand and gravel industry
  • Slurry handling
  • Lining of slurry chutes, pipes, flotation cells, tanks and launders
  • Lining of excavator buckets to prevent caking (clay)
REMALINE MP 40/CN
Top layer
.
Polymer
NRDIN ISO 1629
Specific weight
1.02 g/cm³DIN EN ISO 1183
Hardness
40 ± 5 Shore AISO 868-2003 (DIN 53505)
Abrasion
140 mm³DIN ISO 4649-2006
Resilience
75%ISO 4462-1986 (DIN 53512)
Roll length
10 m
Color
Orange/Black
Ref. No. Designation Dimensions Weight Top layer Signal layer
5491440
REMALINE MP 40/CN6 x 2 000 mm
6.80 kg/m²
4 mm
2 mm
5491450
REMALINE MP 40/CN10 x 2 000 mm
11.13 kg/m²
6 mm
4 mm
5491460
REMALINE MP 40/CN12 x 2 000 mm
13.23 kg/m²
8 mm
4 mm
5491470
REMALINE MP 40/CN20 x 2 000 mm
21.84 kg/m²
16 mm
4 mm
5491480
REMALINE MP 40/CN25 x 2 000 mm
27.04 kg/m²
21 mm
4 mm
5491490
REMALINE MP 40/CN50 x 2 000 mm
54.08 kg/m²
40 mm
10 mm
top
REMALINE 40
Properties

  • Wear-resistant
  • High tensile strength
  • High tear growth resistance
  • Highly elastic


   Area of application

  • Flexilo and hopper lining
  • Lining for coal processing
  • Lagging for non-driven pulleys
  • Lining against caking, abrasion and impact
REMALINE 40/CN
Polymer
NRDIN ISO 1629
Specific weight
1.05 g/cm³DIN EN ISO 1183
Hardness
48 ± 5 Shore AISO 868-2003 (DIN 53505)
Abrasion
135 mm³DIN ISO 4649-2006
Resilience
63%ISO 4462-1986 (DIN 53512)
Roll length
10 m
Color
Black
Ref. No. Designation Dimensions Weight
5490914
REMALINE 40/CN3 x 1 500 mm
3.96 kg/m²
5490976
REMALINE 40/CN6 x 2 000 mm
6.93 kg/m²
5490990
REMALINE 40/CN10 x 2 000 mm
11.50 kg/m²
5491030
REMALINE 40/CN15 x 2 000 mm
16.95 kg/m²
5491054
REMALINE 40/CN20 x 2 000 mm
22.40 kg/m²
5491092
REMALINE 40/CN25 x 2 000 mm
28.00 kg/m²
top
REMALINE 40/EP160/CN
Fabric reinforced
Polymer
NRDIN ISO 1629
Specific weight
1.05 g/cm³DIN EN ISO 1183
Hardness
48 ± 5 Shore AISO 868-2003 (DIN 53505)
Abrasion
135 mm³DIN ISO 4649-2006
Resilience
63%ISO 4462-1986 (DIN 53512)
Roll length
10 m
Color
Black
Ref. No. Designation Dimensions Weight
5491140
REMALINE 40/EP160/CN6 x 2 000 mm
6.93 kg/m²
5491229
REMALINE 40/EP160/CN10 x 2 000 mm
11.60 kg/m²
5491236
REMALINE 40/EP160/CN15 x 2 000 mm
16.65 kg/m²
top
REMALINE 40 OIL/CN
Oil and grease resistant
Polymer
NBRDIN ISO 1629
Specific weight
1.10 g/cm³DIN EN ISO 1183
Hardness
46 ± 5 Shore AISO 868-2003 (DIN 53505)
Abrasion
180 mm³DIN ISO 4649-2006
Resilience
40%ISO 4462-1986 (DIN 53512)
Roll length
10 m
Color
Black
Ref. No. Designation Dimensions Weight
5491300
REMALINE 40 OIL/CN6 x 2 000 mm
7.25 kg/m²
5491410
REMALINE 40 OIL/CN10 x 2 000 mm
12.00 kg/m²
top
REMALINE 40 OIL/EP160/CN
Oil and grease resistant, fabric reinforced
Polymer
NBRDIN ISO 1629
Specific weight
1.10 g/cm³DIN EN ISO 1183
Hardness
46 ± 5 Shore AISO 868-2003 (DIN 53505)
Abrasion
180 mm³DIN ISO 4649-2006
Resilience
40%ISO 4462-1986 (DIN 53512)
Roll length
10 m
Color
Black
Ref. No. Designation Dimensions Weight
5491340
REMALINE 40 OIL/EP160/CN6 x 2 000 mm
7.25 kg/m²
5491360
REMALINE 40 OIL/EP160/CN10 x 2 000 mm
12.20 kg/m²
top
REMALINE 40 S/CN
Flame resistant and antistatic
May be used in ATEX installations.

Required adhesive system for antistatic lining: Metal Primer PR 200 and Cement SC 4000 black/Hardener E 40 or Cement SC 2000 black/Hardener UT-R 20.
Polymer
NR/BRDIN ISO 1629
Specific weight
1.27 g/cm³DIN EN ISO 1183
Hardness
44 ± 5 Shore AISO 868-2003 (DIN 53505)
Abrasion
160 mm³DIN ISO 4649-2006
Resilience
57%ISO 4462-1986 (DIN 53512)
Electric resistance
Antistatic*
Inflammability
Flame resistantEN 20340 (DIN 22103)
CN bonding layer
Conductive (black)
Roll length
10 m
Color
Black
*Surface and volume resistivity < 1 x 10^6 Ohm, tested in accordance with DIN IEC 93 / VDE 0303 part 30.
Ref. No. Designation Dimensions Weight
5491560
REMALINE 40 S/CN6 x 2 000 mm
8.13 kg/m²
5491597
REMALINE 40 S/CN10 x 2 000 mm
13.00 kg/m²
top
REMALINE 40 HR/CN
Heat resistant
Polymer
NRDIN ISO 1629
Specific weight
0.99 g/cm³DIN EN ISO 1183
Hardness
40 ± Shore AISO 868-2003 (DIN 53505)
Abrasion
140 mm³DIN ISO 4649-2006
Resilience
77%ISO 4462-1986 (DIN 53512)
Max. temperature
up to 100 °C, brief periods up to 120 °C
Roll length
10 m
Color
Black
Ref. No. Designation Dimensions Weight
5492070
REMALINE 40 HR/CN6 x 2 000 mm
6.62 kg/m²
5492101
REMALINE 40 HR/CN10 x 2 000 mm
11.30 kg/m²
top
REMALINE 40 HR/EP160/CN
Heat resistant, fabric reinforced
Polymer
NRDIN ISO 1629
Specific weight
0.99 g/cm³DIN EN ISO 1183
Hardness
40 ± Shore AISO 868-2003 (DIN 53505)
Abrasion
140 mm³DIN ISO 4649-2006
Resilience
77%ISO 4462-1986 (DIN 53512)
Max. temperature
up to 100 °C, brief periods up to 120 °C
Roll length
10 m
Color
Black
Ref. No. Designation Dimensions Weight
5492260
REMALINE 40 HR/EP160/CN6 x 2 000 mm
6.62 kg/m²
5492297
REMALINE 40 HR/EP160/CN10 x 2 000 mm
11.30 kg/m²
top
REMALINE 40 WHITE FOOD/CN
Food quality
Food quality in accordance with:
  • BfR, Plastics Recommendations XXI, Cat. 3 & 4
  • FDA Regulation No. 21 Sec. 177.2600
Polymer
NRDIN ISO 1629
Specific weight
1.02 g/cm³DIN EN ISO 1183
Hardness
38 ± 5 Shore AISO 868-2003 (DIN 53505)
Abrasion at 5 N
100 mm³DIN ISO 4649-2006
Resilience
80%ISO 4462-1986 (DIN 53512)
Roll length
10 m
Color
White
Ref. No. Designation Dimensions Weight
5492470
REMALINE 40 WHITE FOOD/CN6 x 2 000 mm
6.80 kg/m²
5499070
REMALINE 40 WHITE FOOD/CN10 x 2 000 mm
11.13 kg/m²
top
REMALINE 50
Properties

  • Wear-resistant, especially to wet abrasion
  • High tear growth resistance
  • High cut resistance


   Area of application

  • Applications in wet areas
  • Lining of chutes, tanks and discharge hoppers for round grains
  • Lagging for non-driven pulleys with low belt traction (prevents caking)
REMALINE 50/CN
Polymer
NRDIN ISO 1629
Specific weight
1.08 g/cm³DIN EN ISO 1183
Hardness
50 ± 5 Shore AISO 868-2003 (DIN 53505)
Abrasion
130 mm³DIN ISO 4649-2006
Resilience
73%ISO 4462-1986 (DIN 53512)
Roll length
10 m
Color
Orange
Ref. No. Designation Dimensions Weight
5492527
REMALINE 50/CN3 x 1 500 mm
3.96 kg/m²
5499080
REMALINE 50/CN5 x 2 000 mm
6.25 kg/m²
5492565
REMALINE 50/CN6 x 2 000 mm
7.38 kg/m²
5492620
REMALINE 50/CN10 x 2 000 mm
11.70 kg/m²
5492644
REMALINE 50/CN12 x 2 000 mm
14.04 kg/m²
5492668
REMALINE 50/CN15 x 2 000 mm
17.40 kg/m²
5492682
REMALINE 50/CN20 x 2 000 mm
23.00 kg/m²
top
REMALINE 60
Properties

  • Excellent wear resistance to dry abrasion and impact
  • Good weather resistance


   Area of application

  • Lining for vibration chutes, slides, material transfer points, truck bodies, impact curtains, bunkers, silos, chutes and filtering buckets
  • Lagging for non-driven pulleys with moderate to high belt traction
REMALINE 60/CN
Polymer
BR/IR/SBRDIN ISO 1629
Specific weight
1.13 g/cm³DIN EN ISO 1183
Hardness
60 ± 5 Shore AISO 868-2003 (DIN 53505)
Abrasion
90 mm³DIN ISO 4649-2006
Resilience
45%ISO 4462-1986 (DIN 53512)
Roll length
10 m (from 40 mm: 5 m)
Color
Black
Ref. No. Designation Dimensions Weight
5492819
REMALINE 60/CN3 x 1 500 mm
4.05 kg/m²
5493052
REMALINE 60/CN5 x 2 000 mm
6.30 kg/m²
5492871
REMALINE 60/CN6 x 2 000 mm
7.44 kg/m²
5492895
REMALINE 60/CN8 x 2 000 mm
9.84 kg/m²
5492912
REMALINE 60/CN10 x 2 000 mm
12.10 kg/m²
5492936
REMALINE 60/CN12 x 2 000 mm
14.28 kg/m²
5492950
REMALINE 60/CN15 x 2 000 mm
17.85 kg/m²
5492974
REMALINE 60/CN20 x 2 000 mm
23.60 kg/m²
5492998
REMALINE 60/CN25 x 2 000 mm
29.50 kg/m²
5493021
REMALINE 60/CN30 x 2 000 mm
35.40 kg/m²
5493069
REMALINE 60/CN40 x 2 000 mm
47.20 kg/m²
5493083
REMALINE 60/CN50 x 2 000 mm
59.00 kg/m²
top
REMALINE 60/EP160/CN
Fabric reinforced
Polymer
BR/IR/SBRDIN ISO 1629
Specific weight
1.13 g/cm³DIN EN ISO 1183
Hardness
60 ± 5 Shore AISO 868-2003 (DIN 53505)
Abrasion
90 cm³DIN ISO 4649-2006
Resilience
45%ISO 4462-1986 (DIN 53512)
Roll length
10 m
Color
Black
Ref. No. Designation Dimensions Weight
5493100
REMALINE 60/EP160/CN6 x 2 000 mm
7.62 kg/m²
5493131
REMALINE 60/EP160/CN10 x 2 000 mm
12.50 kg/m²
top
REMALINE MP 60
Properties

  • Integrated replacement indicator
  • Black wear protection layer
  • Orange signal layer
  • Excellent wear resistance to dry abrasion and impact
  • Good weather resistance


   Area of application

  • Lining for vibration chutes, slides, material transfer points, truck bodies, impact curtains, bunkers, silos, chutes and filtering buckets
REMALINE MP 60/CN
Top layer
Polymer
BR/IR/SBRDIN ISO 1629
Specific weight
1.13 g/cm³DIN EN ISO 1183
Hardness
60 ± 5 Shore AISO 868-2003 (DIN 53505)
Abrasion
90 mm³DIN ISO 4649-2006
Resilience
45%ISO 4462-1986 (DIN 53512)
Roll length
10 m (from 40 mm: 5 m)
Color
Black/orange
Ref. No. Designation Dimensions Weight Top layer Signal layer
5491650
REMALINE MP 60/CN6 x 2 000 mm
7.27 kg/m²
4 mm
2 mm
5491660
REMALINE MP 60/CN10 x 2 000 mm
11.91 kg/m²
6 mm
4 mm
5491670
REMALINE MP 60/CN12 x 2 000 mm
14.28 kg/m²
8 mm
4 mm
5491680
REMALINE MP 60/CN20 x 2 000 mm
23.86 kg/m²
16 mm
4 mm
5491690
REMALINE MP 60/CN25 x 2 000 mm
29.68 kg/m²
21 mm
4 mm
5491700
REMALINE MP 60/CN50 x 2 000 mm
59.22 kg/m²
40 mm
10 mm
top
REMALINE 70
Properties

  • Superior resistance to wear
  • Excellent resistance to abrasion
  • Extremely high tensile strength
  • Good weather resistance


   Area of application

  • Material transfer points, chutes, bunkers and slides
  • Lining for truck bodies, impact curtains and vibrating conveyors
  • Lagging for non-driven drums with moderate to high belt traction
  • Cold refurbishing of conveyor belts
REMALINE 70/CN
Polymer
NR/BRDIN ISO 1629
Specific weight
1.10 g/cm³DIN EN ISO 1183
Hardness
64 ± 5 Shore AISO 868-2003 (DIN 53505)
Abrasion
50 mm³DIN ISO 4649-2006
Resilience
51%ISO 4462-1986 (DIN 53512)
Roll length
10 m (from 40 mm: 5 m)
Color
Black
Ref. No. Designation Dimensions Weight
5493210
REMALINE 70/CN3 x 1 500 mm
4.14 kg/m²
5499100
REMALINE 70/CN5 x 2 000 mm
6.30 kg/m²
5499110
REMALINE 70/CN6 x 2 000 mm
7.25 kg/m²
5493289
REMALINE 70/CN8 x 2 000 mm
9.24 kg/m²
5493313
REMALINE 70/CN10 x 2 000 mm
11.90 kg/m²
5493337
REMALINE 70/CN12 x 2 000 mm
14.04 kg/m²
5493351
REMALINE 70/CN15 x 2 000 mm
17.40 kg/m²
5493375
REMALINE 70/CN20 x 2 000 mm
23.20 kg/m²
5493399
REMALINE 70/CN25 x 2 000 mm
28.75 kg/m²
5493416
REMALINE 70/CN30 x 2 000 mm
34.50 kg/m²
5493430
REMALINE 70/CN40 x 2 000 mm
46.00 kg/m²
5493454
REMALINE 70/CN50 x 2 000 mm
57.50 kg/m²
top
REMALINE 70/EP160/CN
Fabric reinforced
Polymer
NR/BRDIN ISO 1629
Specific weight
1.10 g/cm³DIN EN ISO 1183
Hardness
64 ± 5 Shore AISO 868-2003 (DIN 53505)
Abrasion
50 mm³DIN ISO 4649-2006
Resilience
51%ISO 4462-1986 (DIN 53512)
Roll length
10 m
Color
Black
Ref. No. Designation Dimensions Weight
5493485
REMALINE 70/EP160/CN6 x 2 000 mm
7.50 kg/m²
5493502
REMALINE 70/EP160/CN10 x 2 000 mm
12.10 kg/m²
5493526
REMALINE 70/EP160/CN15 x 2 000 mm
17.85 kg/m²
5493533
REMALINE 70/EP160/CN20 x 2 000 mm
23.60 kg/m²
top
REMALINE 70 OIL/CN
Oil and grease resistant
Polymer
NBRDIN ISO 1629
Specific weight
1.16 g/cm³DIN EN ISO 1183
Hardness
61 ± 5 Shore AISO 868-2003 (DIN 53505)
Abrasion
100 mm³DIN ISO 4649-2006
Resilience
39%ISO 4462-1986 (DIN 53512)
Roll length
10 m
Color
Black
Ref. No. Designation Dimensions Weight
5499120
REMALINE 70 OIL/CN6 x 2 000 mm
7.75 kg/m²
5493571
REMALINE 70 OIL/CN10 x 2 000 mm
12.60 kg/m²
top
REMALINE 70 OIL/EP160/CN
Oil and grease resistant, fabric reinforced
Polymer
NBRDIN ISO 1629
Specific weight
1.20 g/cm³DIN EN ISO 1183
Hardness
65 ± 5 Shore AISO 868-2003 (DIN 53505)
Abrasion
125 mm³DIN ISO 4649-2006
Resilience
25%ISO 4462-1986 (DIN 53512)
Roll length
10 m
Color
Black
Ref. No. Designation Dimensions Weight
5499130
REMALINE 70 OIL/EP160/CN6 x 2 000 mm
7.80 kg/m²
5499140
REMALINE 70 OIL/EP160/CN10 x 2 000 mm
12.40 kg/m²
top
REMALINE 70 V/CN
Self-extinguishing, antistatic and moderate oil resistantance
German underground approval: LOBA No. 18.43.21-89-33
Polish underground approval: Dopuszczenie WUG Katowice No. B/1724/2007
May be used in ATEX installations.

Required adhesive system for antistatic lining:
Metal Primer PR 200 and Cement SC 4000 black/Hardener E 40 or Cement SC 2000 black/Hardener UT-R 20.
Polymer
CRDIN ISO 1629
Specific weight
1.40 g/cm³DIN EN ISO 1183
Hardness
62 ± 5 Shore AISO 868-2003 (DIN 53505)
Abrasion
130 mm³DIN ISO 4649-2006
Resilience
27%ISO 4462-1986 (DIN 53512)
Electric resistance
Antistatic*
Inflammability
Self-extinguishing**
CN bonding layer
Conductive (black)
Roll length
10 m
Color
Black
*Surface and volume resistivity < 1 x 10^6 Ohm, tested in accordance with DIN IEC 93 / VDE 0303 part 30.
**Fulfills DIN 22100-7 safety requirements (fire safety, hygiene, electrical).
Ref. No. Designation Dimensions Weight
5493863
REMALINE 70 V/CN6 x 2 000 mm
8.82 kg/m²
5493935
REMALINE 70 V/CN10 x 2 000 mm
14.80 kg/m²
5493959
REMALINE 70 V/CN12 x 2 000 mm
17.76 kg/m²
5493973
REMALINE 70 V/CN15 x 2 000 mm
22.20 kg/m²
5493997
REMALINE 70 V/CN20 x 2 000 mm
29.60 kg/m²
top
REMALINE 70 S/CN
Flame resistant and antistatic
May be used in ATEX installations.

Required adhesive system for antistatic lining: Metal Primer PR 200 and Cement SC 4000 black/Hardener E 40 or Cement SC 2000 black/Hardener UT-R 20.
Polymer
SBR/BRDIN ISO 1629
Specific weight
1.24 g/cm³DIN EN ISO 1183
Hardness
68 ± 5 Shore AISO 868-2003 (DIN 53505)
Abrasion
125 mm³DIN ISO 4649-2006
Resilience
40%ISO 4462-1986 (DIN 53512)
Electric resistance
Antistatic*
Inflammability
Flame resistantEN 20340 (DIN 22103)
CN bonding layer
Conductive (black)
Roll length
10 m
Color
Black
*Surface and volume resistivity < 1 x 10^6 Ohm, tested in accordance with DIN IEC 93 / VDE 0303 part 30.
Ref. No. Designation Dimensions Weight
5499180
REMALINE 70 S/CN6 x 2 000 mm
8.16 kg/m²
5499230
REMALINE 70 S/CN10 x 2 000 mm
13.00 kg/m²
top
REMALINE 70 HR/CN
Heat resistant
Polymer
IR/BRDIN ISO 1629
Specific weight
1.12 g/cm³DIN EN ISO 1183
Hardness
62 ± 5 Shore AISO 868-2003 (DIN 53505)
Abrasion
60 mm³DIN ISO 4649-2006
Resilience
53%ISO 4462-1986 (DIN 53512)
Max. temperature
up to 110 °C, short peaks up to 130 °C
Roll length
10 m
Color
Black
Ref. No. Designation Dimensions Weight
5493715
REMALINE 70 HR/CN6 x 2 000 mm
7.26 kg/m²
5493753
REMALINE 70 HR/CN10 x 2 000 mm
12.00 kg/m²
top
REMALINE 70 WHITE FOOD/CN
Food quality
Food quality in accordance with:
  • BfR, Plastics Recommendations XXI, Cat. 4
  • FDA Regulation No. 21 Sec.177.2600
Polymer
NR/BRDIN ISO 1629
Specific weight
1.19 g/cm³DIN EN ISO 1183
Hardness
60 ± 5 Shore AISO 868-2003 (DIN 53505)
Abrasion
160 mm³DIN ISO 4649-2006
Resilience
57%ISO 4462-1986 (DIN 53512)
Roll length
10 m
Color
White
Ref. No. Designation Dimensions Weight
5499150
REMALINE 70 WHITE FOOD/CN6 x 2 000 mm
8.26 kg/m²
5499160
REMALINE 70 WHITE FOOD/CN10 x 2 000 mm
13.00 kg/m²
top
REMALINE 70 WHITE OIL FOOD/CN
Food quality, oil and grease resistant
Food quality in accordance with:
  • BfR, Plastics Recommendations XXI, Cat. 4
  • FDA Regulation No. 21 Sec. 177.2600
Polymer
NBRDIN ISO 1629
Specific weight
1.23 g/cm³DIN EN ISO 1183
Hardness
56 ± 5 Shore AISO 868-2003 (DIN 53505)
Abrasion
160 mm³DIN ISO 4649-2006
Resilience
30%ISO 4462-1986 (DIN 53512)
Roll length
10 m
Color
White
Ref. No. Designation Dimensions Weight
5499170
REMALINE 70 WHITE OIL FOOD/CN6 x 2 000 mm
8.16 kg/m²
5499090
REMALINE 70 WHITE OIL FOOD/CN10 x 2 000 mm
13.20 kg/m²
top
REMALINE 90
Properties

  • Hard, smooth surface
  • Smoothness increases during operation
  • Good weather resistance
  • Workable after warming up


   Area of application

  • Lining of sliding surfaces
  • Lining for electro-magnetic vibratory feeders
  • Improves flow of material in chutes with fine, grainy materials
  • Discharge chutes for waste slag
REMALINE 90/CN
Polymer
BR/NRDIN ISO 1629
Specific weight
1.13 g/cm³DIN EN ISO 1183
Hardness
90 ± 5 Shore AISO 868-2003 (DIN 53505)
Abrasion
125 mm³DIN ISO 4649-2006
Resilience
30%ISO 4462-1986 (DIN 53512)
Roll length
10 m (from 10 mm delivered in 1x2 m sheets)
Color
Black
Ref. No. Designation Dimensions Weight
5494119
REMALINE 90/CN3 x 1 500 x 10 000 mm
3.90 kg/m²
5494130
REMALINE 90/CN6 x 2 000 x 10 000 mm
7.68 kg/m²
5494154
REMALINE 90/CN10 x 1 000 x 2 000 mm
12.50 kg/m²
5494178
REMALINE 90/CN15 x 1 000 x 2 000 mm
18.75 kg/m²
top
UNILINE Rubber lining material for simple applications
UNILINE 40
Properties

  • Wear-resistant
  • Good elasticity
  • Green contact layer (KS)


   Area of application

  • Lining for simple applications and wet wear
UNILINE 40/KS
Green contact layer (KS)
Polymer
NR/IRDIN ISO 1629
Specific weight
1.10 g/cm³DIN EN ISO 1183
Hardness
42 ± 5 Shore AISO 868-2003 (DIN 53505)
Abrasion
160 mm³DIN ISO 4649-2006
Resilience
50%ISO 4462-1986 (DIN 53512)
Roll length
10 m
Color
Black
Ref. No. Designation Dimensions Weight
5503502
UNILINE 40/KS3 x 1 500 mm
3.75 kg/m²
5503431
UNILINE 40/KS4 x 2 000 mm
4,96 kg/m²
5503420
UNILINE 40/KS6 x 2 000 mm
7.25 kg/m²
5503447
UNILINE 40/KS8 x 2 000 mm
9.49 kg/m²
5503454
UNILINE 40/KS10 x 2 000 mm
11.87 kg/m²
5503461
UNILINE 40/KS12 x 2 000 mm
14.11 kg/m²
5503478
UNILINE 40/KS15 x 2 000 mm
17.64 kg/m²
5503485
UNILINE 40/KS20 x 2 000 mm
23.31 kg/m²
5503492
UNILINE 40/KS25 x 2 000 mm
29.14 kg/m²
top
UNILINE 60
Properties

  • Wear-resistant
  • Good tear growth resistance
  • Green contact layer (KS)


   Area of application

  • Lining for simple applications and dry wear
UNILINE 60/KS
Green contact layer (KS)
Polymer
NR/IR/SBRDIN ISO 1629
Specific weight
1.21 g/cm³DIN EN ISO 1183
Hardness
63 ± 5 Shore AISO 868-2003 (DIN 53505)
Abrasion
160 mm³DIN ISO 4649-2006
Resilience
50%ISO 4462-1986 (DIN 53512)
Roll length
10 m (from 40mm: 5m)
Color
Black
Ref. No. Designation Dimensions Weight
5503351
UNILINE 60/KS3 x 1 500 mm
3.97 kg/m²
5507520
UNILINE 60/KS5 x 2 000 mm
6.51 kg/m²
5503280
UNILINE 60/KS6 x 2 000 mm
7.81 kg/m²
5503296
UNILINE 60/KS8 x 2 000 mm
10.33 kg/m²
5503306
UNILINE 60/KS10 x 2 000 mm
12.92 kg/m²
5503313
UNILINE 60/KS12 x 2 000 mm
15.37 kg/m²
5503320
UNILINE 60/KS15 x 2 000 mm
19.22 kg/m²
5503337
UNILINE 60/KS20 x 2 000 mm
25.62 kg/m²
5503344
UNILINE 60/KS25 x 2 000 mm
32.03 kg/m²
5503920
UNILINE 60/KS30 x 2 000 mm
38.43 kg/m²
5503270
UNILINE 60/KS40 x 2 000 mm
50.82 kg/m²
5503260
UNILINE 60/KS50 x 2 000 mm
63.53 kg/m²
top
REMATHAN Polyurethane lining material
REMATHAN G 65
Properties

  • High resistance to wear
  • Oil and grease resistant
  • Resists hydrolysis
  • Resists microbes
  • High impact elasticity
  • High notch value
  • Temperature range from -30 °C to +80 °C
  • CN bonding layer provides fast and good adhesion


   Area of application

  • Oil-, grease- and wear-resistant lining
  • Prevents caking and noise
  • Slides and chutes
  • Slip ground containers
REMATHAN G 65/CN
Polymer
AUDIN ISO 1629
Specific weight
1.22 g/cm³DIN EN ISO 1183
Hardness
65 ± 5 Shore AISO 868-2003 (DIN 53505)
Abrasion
70 mm³DIN ISO 4649-2006
Resilience
40%ISO 4462-1986 (DIN 53512)
Roll length
10 m
Color
Green
Ref. No. Designation Dimensions
5732263
REMATHAN G 65/CN6 x 1 400 mm
5732270
REMATHAN G 65/CN8 x 1 400 mm
5732287
REMATHAN G 65/CN10 x 1 400 mm
5734292
REMATHAN G 65/CN12 x 1 400 mm
5732294
REMATHAN G 65/CN15 x 1 400 mm
5732304
REMATHAN G 65/CN20 x 1 400 mm
5732311
REMATHAN G 65/CN25 x 1 400 mm
top
REMATHAN G 65/EP160/CN
Fabric reinforced
Polymer
AUDIN ISO 1629
Specific weight
1.22 g/cm³DIN EN ISO 1183
Hardness
65 ± 5 Shore AISO 868-2003 (DIN 53505)
Abrasion
70 mm³DIN ISO 4649-2006
Resilience
40%ISO 4462-1986 (DIN 53512)
Roll length
10 m
Color
Green
Ref. No. Designation Dimensions
5732562
REMATHAN G 65/EP160/CN6 x 1 400 mm
5732579
REMATHAN G 65/EP160/CN8 x 1 400 mm
5732586
REMATHAN G 65/EP160/CN10 x 1 400 mm
5734591
REMATHAN G 65/EP160/CN12 x 1 400 mm
5732593
REMATHAN G 65/EP160/CN15 x 1 400 mm
5732603
REMATHAN G 65/EP160/CN20 x 1 400 mm
5732610
REMATHAN G 65/EP160/CN25 x 1 400 mm
top
REMATHAN G 65
Polymer
AUDIN ISO 1629
Specific weight
1.22 g/cm³DIN EN ISO 1183
Hardness
65 ± 5 Shore AISO 868-2003 (DIN 53505)
Abrasion
70 mm³DIN ISO 4649-2006
Resilience
40%ISO 4462-1986 (DIN 53512)
Length
2 - 10 m (in complete meters)
Color
Green
Ref. No. Designation Dimensions
5732081
REMATHAN G 656 x 1 400 mm
5732098
REMATHAN G 658 x 1 400 mm
5732108
REMATHAN G 6510 x 1 400 mm
5734113
REMATHAN G 6512 x 1 400 mm
5732115
REMATHAN G 6515 x 1 400 mm
5732122
REMATHAN G 6520 x 1 400 mm
5732139
REMATHAN G 6525 x 1 400 mm
top
REMATHAN G 75
Properties

  • Excellent resistance to wear
  • Oil and grease resistant
  • Resists hydrolysis
  • Resists microbes
  • High impact elasticity
  • High notch value
  • Temperature range from -30 °C to +80 °C
  • CN bonding layer provides fast and good adhesion


   Area of application

  • Oil-, grease- and wear-resistant lining
  • Prevents caking and noise
  • Slides and chutes
REMATHAN G 75/CN
Polymer
AUDIN ISO 1629
Specific weight
1.22 g/cm³DIN EN ISO 1183
Hardness
75 ± 5 Shore AISO 868-2003 (DIN 53505)
Abrasion
55 mm³DIN ISO 4649-2006
Resilience
35%ISO 4462-1986 (DIN 53512)
Roll length
10 m
Color
Green
Ref. No. Designation Dimensions
5732328
REMATHAN G 75/CN6 x 1 400 mm
5732335
REMATHAN G 75/CN8 x 1 400 mm
5732342
REMATHAN G 75/CN10 x 1 400 mm
5734357
REMATHAN G 75/CN12 x 1 400 mm
5732359
REMATHAN G 75/CN15 x 1 400 mm
5732366
REMATHAN G 75/CN20 x 1 400 mm
5732373
REMATHAN G 75/CN25 x 1 400 mm
top
REMATHAN G 75/EP160/CN
Polymer
AUDIN ISO 1629
Specific weight
1.22 g/cm³DIN EN ISO 1183
Hardness
75 ± 5 Shore AISO 868-2003 (DIN 53505)
Abrasion
55 mm³DIN ISO 4649-2006
Resilience
35%ISO 4462-1986 (DIN 53512)
Roll length
10 m
Color
Green
Ref. No. Designation Dimensions
5732768
REMATHAN G 75/EP160/CN6 x 1 400 mm
5732775
REMATHAN G 75/EP160/CN8 x 1 400 mm
5732782
REMATHAN G 75/EP160/CN10 x 1 400 mm
5734797
REMATHAN G 75/EP160/CN12 x 1 400 mm
5732799
REMATHAN G 75/EP160/CN15 x 1 400 mm
5732809
REMATHAN G 75/EP160/CN20 x 1 400 mm
5732816
REMATHAN G 75/EP160/CN25 x 1 400 mm
top
REMATHAN G 75
Polymer
AUDIN ISO 1629
Specific weight
1.22 g/cm³DIN EN ISO 1183
Hardness
75 ± 5 Shore AISO 868-2003 (DIN 53505)
Abrasion
55 mm³DIN ISO 4649-2006
Resilience
35%ISO 4462-1986 (DIN 53512)
Roll length
10 m
Color
Green
Ref. No. Designation Dimensions
5732146
REMATHAN G 756 x 1 400 mm
5732153
REMATHAN G 758 x 1 400 mm
5732160
REMATHAN G 7510 x 1 400 mm
5734175
REMATHAN G 7512 x 1 400 mm
5732177
REMATHAN G 7515 x 1 400 mm
5732184
REMATHAN G 7520 x 1 400 mm
5732191
REMATHAN G 7525 x 1 400 mm
top
REMATHAN G 90
Properties

  • High resistance to wear
  • Oil and grease resistant
  • Resists hydrolysis
  • Resists microbes
  • High impact elasticity
  • High notch value
  • Temperature range from -30 °C to +80 °C
  • CN bonding layer provides fast and good adhesion


   Area of application

  • Oil-, grease- and wear-resistant lining
  • Prevents caking and noise
  • Slides and chutes
  • Concrete discharge chutes
REMATHAN G 90/CN
Polymer
AUDIN ISO 1629
Specific weight
1.23 g/cm³DIN EN ISO 1183
Hardness
90 ± 5 Shore AISO 868-2003 (DIN 53505)
Abrasion
80 mm³DIN ISO 4649-2006
Resilience
31%ISO 4462-1986 (DIN 53512)
Roll length
10 m
Color
Green
Ref. No. Designation Dimensions
5732380
REMATHAN G 90/CN6 x 1 400 mm
5732397
REMATHAN G 90/CN8 x 1 400 mm
5732407
REMATHAN G 90/CN10 x 1 400 mm
5734412
REMATHAN G 90/CN12 x 1 400 mm
5732414
REMATHAN G 90/CN15 x 1 400 mm
5732421
REMATHAN G 90/CN20 x 1 400 mm
5732438
REMATHAN G 90/CN25 x 1 400 mm
top
REMATHAN G 90/EP160/CN
Polymer
AUDIN ISO 1629
Specific weight
1.23 g/cm³DIN EN ISO 1183
Hardness
90 ± 5 Shore AISO 868-2003 (DIN 53505)
Abrasion
80 mm³DIN ISO 4649-2006
Resilience
31%ISO 4462-1986 (DIN 53512)
Roll length
10 m
Color
Green
Ref. No. Designation Dimensions
5732964
REMATHAN G 90/EP160/CN6 x 1 400 mm
5732971
REMATHAN G 90/EP160/CN8 x 1 400 mm
5732988
REMATHAN G 90/EP160/CN10 x 1 400 mm
5734993
REMATHAN G 90/EP160/CN12 x 1 400 mm
5732995
REMATHAN G 90/EP160/CN15 x 1 400 mm
5733004
REMATHAN G 90/EP160/CN20 x 1 400 mm
5733011
REMATHAN G 90/EP 160/CN25 x 1 400 mm
top
REMATHAN G 90
Polymer
AUDIN ISO 1629
Specific weight
1.23 g/cm³DIN EN ISO 1183
Hardness
90 ± 5 Shore AISO 868-2003 (DIN 53505)
Abrasion
80 mm³DIN ISO 4649-2006
Resilience
31%ISO 4462-1986 (DIN 53512)
Roll length
10 m
Color
Green
Ref. No. Designation Dimensions
5732201
REMATHAN G 906 x 1 400 mm
5732218
REMATHAN G 908 x 1 400 mm
5732225
REMATHAN G 9010 x 1 400 mm
5734230
REMATHAN G 9012 x 1 400 mm
5732232
REMATHAN G 9015 x 1 400 mm
5732249
REMATHAN G 9020 x 1 400 mm
5732256
REMATHAN G 9025 x 1 400 mm
top
REMAFLON Non-stick liners
REMAFLON
Properties

  • Combination of polytetrafluorethylene (PTFE = Teflon®) and rubber
  • CN bonding layer provides fast and good adhesion
  • Excellent anti-caking properties thanks to the Teflon® surface (PTFE = extremely low adhesion and friction coefficients)
  • Teflon® surfaces approved for contact with food


   Area of application

  • Used for toughest caking and material flow problems requiring the use of Teflon surfaces, such as for REA plaster or for the molasses segment (wet) of the sugar industry
  • Flow improvement of very fine and powdery, non-abrasive materials
  • Lining to prevent bridging and obstructions
REMAFLON
  • Surface: White, PTFE virginal, 1 mm
  • Base: Rubber (black) with CN bonding layer, 2 mm
Ref. No. Designation Dimensions Thickness
5507004
REMAFLON 2 000 x 1 200 mm
3 mm
5507005
REMAFLON 4 000 x 1 200 mm
3 mm
5507006
REMAFLON 6 000 x 1 200 mm
3 mm
5507007
REMAFLON 8 000 x 1 200 mm
3 mm
5507008
REMAFLON 10 000 x 1 200 mm
3 mm
top
REMALEN Non-stick liners
REMALEN
Properties

  • Combination of polyethylene (PE) and rubber
  • CN bonding layer provides fast and secure adhesion
  • High-slip surface due to low adhesion and friction coefficients
  • REMALEN minimizes caking and increases output
  • PE surface is food quality


   Area of application

  • Prevents flow problems with very fine and powdery, non-abrasive materials
  • Used in the storage and transport area for bulk and unit load materials
REMALEN
  • Surface: Transparent, UHMW-PE, 1 mm
  • Base: Rubber (black) with CN bonding layer, 2 mm
Ref. No. Designation Dimensions Thickness
5509882
REMALEN 4000 x 1 450 mm
3 mm
5509883
REMALEN 6000 x 1 450 mm
3 mm
5509884
REMALEN 8000 x 1 450 mm
3 mm
5509885
REMALEN 10 000 x 1 450 mm
3 mm
top
REMASLIDE Plate Non-stick liners
REMASLIDE Plate
Properties

  • Combination of polyethylene (PE) and rubber
  • CN bonding layer provides fast and secure adhesion
  • Excellent anti-adhesion properties


   Area of application

  • Improves the flow of fine and powdery (non-sharp-edged) materials such as for stockpiling of bulk materials in bunkers, silos and other containers as well as their transport through chutes and hoppers.
REMASLIDE Plate
  • Surface: Green, UHMW-PE, 5 mm or 10 mm
  • Base: Rubber (black) with CN bonding layer, 3 mm
Ref. No. Designation Dimensions
5507065
REMSLIDE Plate 8 x 1 000 x 1 900 mm
5506963
REMSLIDE Plate 13 x 1 000 x 1 900 mm
top
REMALOX Ceramic lining material
REMALOX
Properties

  • Highly wear-resistant AI203 ceramic tiles on special rubber with CN bonding layer
  • Highest abrasion resistance
  • Easy application by bonding to substrate
  • Square, rectangular and hexagonal ceramic tiles


   Area of application

  • Lining against extreme wear through abrasion at high speeds
  • Pipelines
  • Vibratory feeders
  • Cyclones
  • Skips
REMALOX
Ref. No. Designation Dimensions Dimensions of ceramic tiles Rubber thickness
5399008
REMALOX 1.5/2.54 x 500 x 500 mm
1.5 x 10 x 10 mm
2.5 mm
5399015
REMALOX 4/48 x 500 x 500 mm
4 x 20 x 20 mm
4 mm
5399022
REMALOX 10/414 x 500 x 500 mm
10 x 20 x 20 mm
4 mm
5399039
REMALOX 25/1540 x 500 x 600 mm
25 x 100 x 150 mm
15 mm
5399046
REMALOX SW 6/612 x 510 x 525 mm
SW 32 x 6 mm
6 mm
5399053
REMALOX SW 12/820 x 510 x 525 mm
SW 32 x 12 mm
8 mm
top
Special rubber elements
Components
Properties

  • Superior resistance to wear
  • Simple attachment of complete components
  • Easy replacement


   Area of application

  • Protects bulk goods conveyor systems from impact wear
  • Minimises caking
  • Noise reduction
KG Bars
Materials: REMALINE 70 with vulcanised fastening profile made of aluminiumKG-01
KG-01


KG-02/KG-03/KG-06/KG-08
KG-02/KG-03/KG-06/KG-08


KG-04/KG-05/KG-07
KG-04/KG-05/KG-07


KG-09
KG-09


WKG-01
WKG-01


Ref. No. Designation Height Dimensions (W x L) Weight TT – Fastening Unit
5390014
KG Bars KG-0150 mm
100 x 2 500 mm
13 kg
I
5390021
KG Bars KG-0242 mm
100 x 2 500 mm
12 kg
I
5390038
KG Bars KG-0380 mm
100 x 2 500 mm
22.5 kg
I
5390045
KG Bars KG-04100 mm
100 x 2 500 mm
28 kg
II
5390052
KG Bars KG-05100 mm
150 x 2 500 mm
42 kg
II
5390069
KG Bars KG-0660 mm
100 x 2 500 mm
16 kg
I
5390076
KG Bars KG-07150 mm
150 x 2 500 mm
62 kg
II
5390083
KG Bars KG-0880 mm
70 x 2 500 mm
16 kg
I
5390090
KG Bars KG-0940 mm
40 x 1 000 mm
2.3 kg
III
5272008
KG Bars KG-1050 mm
50 x 2 500 mm
8.5 kg
III
5390100
KG Bars WKG-0136 mm
100 x 2 500 mm
9 kg
I
top
KG Bars V
Materials: REMALINE 70 V with vulcanised fastening profile made of steel. May be used in underground mining applications and ATEX installations.KG-01 V
KG-01 V


KG-02 V/KG-03 V/KG-06 V/KG-08 V
KG-02 V/KG-03 V/KG-06 V/KG-08 V


KG-04 V/KG-05 V/KG-07 V
KG-04 V/KG-05 V/KG-07 V


Ref. No. Designation Height Dimensions (W x L) Weight TT – Fastening Unit
5390210
KG Bars KG-01 V50 mm
100 x 2 500 mm
20 kg
IV
5390227
KG Bars KG-02 V42 mm
100 x 2 500 mm
16 kg
IV
5390234
KG Bars KG-03 V80 mm
100 x 2 500 mm
30 kg
IV
5390241
KG Bars KG-04 V100 mm
100 x 2 500 mm
36 kg
V
5390258
KG Bars KG-05 V100 mm
150 x 2 500 mm
54 kg
V
5390265
KG Bars KG-06 V60 mm
100 x 2 500 mm
23 kg
IV
5390272
KG Bars KG-07 V150 mm
150 x 2 500 mm
80 kg
V
5390203
KG Bars KG-08 V80 mm
70 x 2 500 mm
21 kg
IV
top
ZP Bars
Materials: REMALINE 70 with vulcanised fastening profile made of aluminiumZP-100/ZP-150
ZP-100/ZP-150


Ref. No. Designation Height Dimensions (W x L) Weight TT – Fastening Unit
5390148
ZP Bars ZP-100100 mm
130 x 2 500 mm
29 kg
II
5390155
ZP Bars ZP-150150 mm
190 x 2 500 mm
60 kg
II
top
ZP Bars V
Materials: REMALINE 70 V with vulcanised fastening profile made of steel. May be used in underground mining applications and ATEX installations.ZP-100 V/ZP-150 V
ZP-100 V/ZP-150 V


Ref. No. Designation Height Dimensions (W x L) Weight TT – Fastening Unit
5390296
ZP Bars ZP-100 V100 mm
130 x 2 500 mm
37 kg
V
5390306
ZP bars ZP-150 V150 mm
190 x 2 500 mm
78 kg
V
top
TT Fastening Units for KG and ZP Bars
Properties

  • Consists of forged TT - Fasteners with washer and self-locking nut
  • Recommendation: 4 fastening units per meter


  
TT - Fastening Units I
Torque: 90 Nm  TT - Fastening Units
TT - Fastening Units


Ref. No. Designation Dimensions
5391006
TT - Fastening Units IM 16 x 40 mm
5391013
TT - Fastening Units IM 16 x 60 mm
5391020
TT - Fastening Units IM 16 x 80 mm
5391037
TT - Fastening Units IM 16 x 100 mm
5391044
TT - Fastening Units IM 16 x 120 mm
top
TT - Fastening Units II
Torque: 150 Nm  TT - Fastening Units
TT - Fastening Units


Ref. No. Designation Dimensions
5391068
TT - Fastening Units IIM 20 x 60 mm
5391075
TT - Fastening Units IIM 20 x 80 mm
5391082
TT - Fastening Units IIM 20 x 100 mm
5391099
TT - Fastening Units IIM 20 x 120 mm
top
TT - Fastening Units III
Torque: 15 NmTT Fastening Units
TT Fastening Units


Ref. No. Designation Dimensions
5391460
TT - Fastening Units IIIM 10 x 30 mm
5391477
TT - Fastening Units IIIM 10 x 60 mm
top
TT - Fastening Units IV
Torque: 60 NmTT - Fastening Units
TT - Fastening Units


Ref. No. Designation Dimensions
5393561
TT - Fastening Units IVM 16 x 40 mm
5393468
TT - Fastening Units IVM 16 x 60 mm
5393475
TT - Fastening Units IVM 16 x 80 mm
top
TT - Fastening Units V
Torque: 60 NmTT - Fastening Units
TT - Fastening Units


Ref. No. Designation Dimensions
5393578
TT - Fastening Units VM 16 x 30 mm
5393705
TT - Fastening Units VM 16 x 60 mm
5393712
TT - Fastening Units VM 16 x 80 mm
top
Serrated profile plates
Properties

  • Easy replacement
  • Compensation of problematic impact angles
  • Excellent resistance to wear


   Area of application

  • Material transfer points with problematic impact angle
  • Impact aprons and elastic impact curtains
Serrated profile plates ZP A
REMALINE 70 serrated anti-wear rubber on ST-37 steel backing.ZP 15 A/ZP 35 A/ZP 55 A
ZP 15 A/ZP 35 A/ZP 55 A


Ref. No. Designation Height Dimensions (W x L) Weight
5394278
Serrated profile plates ZP 15 A15 mm
500 x 2 520 mm
40 kg
5394292
Serrated profile plates ZP 35 A35 mm
500 x 2 520 mm
59 kg
5394319
Serrated profile plates ZP 55 A55 mm
500 x 2 486 mm
72 kg
top
Serrated profile plates ZP B
REMALINE 70 serrated anti-wear rubber, fabric reinforced (EP 160).Easy bonding with the CN bonding layer.ZP 15 B/ZP 35 B/ZP 55 B
ZP 15 B/ZP 35 B/ZP 55 B


Ref. No. Designation Height Dimensions (W x L) Weight
5394285
Serrated profile plates ZP 15 B15 mm
500 x 2 495 mm
17 kg
5394302
Serrated profile plates ZP 35 B35 mm
500 x 2 495 mm
32 kg
5394326
Serrated profile plates ZP 55 B55 mm
500 x 2 461 mm
47 kg
top
Serrated profile plates ZPL
REMALINE 70 serrated anti-wear rubber.
Minimum order amount: 3 pcs.
Ref. No. Designation Height Dimensions (W x L) Weight Number of fasteners Dimensions
5395301
Serrated profile plates ZPL 4040 mm
1 400 x 2 420 mm
105 kg
10
 
5395318
Serrated profile plates ZPL 6060 mm
1 400 x 2 420 mm
162 kg
12
 
5395325
Serrated profile plates ZPL 8080 mm
1 400 x 2 420 mm
208 kg
14
 
5395332
Serrated profile plates ZPL 100100 mm
1 400 x 2 420 mm
242 kg
16
 
5395349
Serrated profile plates ZPL 120120 mm
1 400 x 2 420 mm
300 kg
20
 
5392861
T-Screw - ZPL Fastener15 mm
   M 16 x 80
top
Serrated profile plates ZPLP
REMALINE 70 serrated anti-wear rubber. Ideally suited for manufacture of impact aprons. Application by bonding (grinding is required).
Ref. No. Designation Height Dimensions (W x L) Weight
5395208
Serrated profile plates ZPLP-A120 mm
492 x 1 760 mm
79 kg
5395215
Serrated profile plates ZPLP-B120 mm
492 x 2 520 mm
114 kg
5395167
Serrated profile plates ZPLPS-A120 mm
250 x 1 760 mm
34 kg
5395174
Serrated profile plates ZPLPS-B120 mm
250 x 2 520 mm
48 kg
top
UVZ Plates
Properties

  • Highly wear resistant REMALINE 70 rubber with 5 mm ST-37 steel backing
  • High service life
  • Easy replacement
  • Compensation for problematic impact angles
  • Noise reducing


   Area of application

  • Material transfer points with problematic angle of impact
  • Wear protection against large-size bulk material
UVZ Plates
REMALINE 70 anti-wear rubber on 5 mm ST-37 steel backing.UVZ Plates
UVZ Plates


Ref. No. Designation Height Dimensions (W x L) Weight
5397282
UVZ Plates 80 mm
450 x 1 000 mm
41 kg
5397323
UVZ Plates 80 mm
500 x 1 000 mm
46 kg
5397361
UVZ Plates 80 mm
600 x 1 000 mm
54 kg
5397402
UVZ Plates 80 mm
750 x 1 000 mm
68 kg
5397440
UVZ Plates 105 mm
450 x 1 000 mm
48 kg
5397488
UVZ Plates 105 mm
500 x 1 000 mm
54 kg
5397529
UVZ Plates 105 mm
600 x 1 000 mm
63 kg
5397567
UVZ Plates 105 mm
750 x 1 000 mm
80 kg
5397608
UVZ Plates 130 mm
450 x 1 000 mm
61 kg
5397646
UVZ Plates 130 mm
500 x 1 000 mm
68 kg
5397684
UVZ Plates 130 mm
600 x 1 000 mm
81 kg
5399228
UVZ Plates 130 mm
750 x 1 000 mm
102 kg
top
HDL (Heavy Duty Lining)
Properties

  • Highly wear resistant REMALINE 70 rubber with 5 mm ST-37 steel backing
  • Long service life
  • Simple attachment of complete components
  • Easy replacement
  • Reduces operating costs
  • Noise reducing
  • Also available without holes


   Area of application

  • Wear protection against rough bulk materials
  • Wear protection against large-size bulk material
  • Lining for the highest demands
  • Lining for truck bodies
HDL Plates
Minimum order quantity of HDL plates:
  • 4 pieces or a multiple (8, 12, 16, etc.) with widths of 450 and 500
  • 3 pieces or a multiple (6, 9, 12, etc.) with widths of 600 and 750
HDL Plate
HDL Plate


Ref. No. Designation Total thickness Dimensions (W x L) Weight Number of fasteners
5395404
HDL Plate 60 mm
450 x 1 500 mm
67 kg
8
5395411
HDL Plate 80 mm
450 x 1 500 mm
81 kg
8
5395428
HDL Plate 100 mm
450 x 1 500 mm
96 kg
8
5395435
HDL Plate 120 mm
450 x 1 500 mm
111 kg
8
5395569
HDL Plate 150 mm
450 x 1 500 mm
133 kg
8
5395442
HDL Plate 60 mm
500 x 1 500 mm
74 kg
8
5395459
HDL Plate 80 mm
500 x 1 500 mm
91 kg
8
5395466
HDL Plate 100 mm
500 x 1 500 mm
107 kg
8
5395473
HDL Plate 120 mm
500 x 1 500 mm
124 kg
8
5395576
HDL Plate 150 mm
500 x 1 500 mm
148 kg
8
5395480
HDL Plate 60 mm
600 x 1 500 mm
90 kg
8
5395497
HDL Plate 80 mm
600 x 1 500 mm
110 kg
8
5395507
HDL Plate 100 mm
600 x 1 500 mm
130 kg
8
5395514
HDL Plate 120 mm
600 x 1 500 mm
157 kg
8
5395583
HDL Plate 150 mm
600 x 1 500 mm
179 kg
8
5395521
HDL Plate 60 mm
750 x 1 500 mm
113 kg
10
5395538
HDL Plate 80 mm
750 x 1 500 mm
138 kg
10
5395545
HDL Plate 100 mm
750 x 1 500 mm
162 kg
10
5395552
HDL Plate 120 mm
750 x 1 500 mm
187 kg
10
5395590
HDL Plate 150 mm
750 x 1 500 mm
224 kg
10
top
HDL Fastening Unit A
HDL Fastening Unit A
HDL Fastening Unit A


Ref. No. Designation
5392696
Hex. bolt M 20 x 80 mm
5392775
U - washer , DIN 7349, outer Ø 44 mm
5392768
U - washer , DIN 125-St., inside Ø 21 mm
5392816
Hex. nut , DIN 985, self-locking, M 20
5394412
Rubber rope Ø 55 x 1 000 mm
top
HDL Fastening Unit B
HDL Fastening Unit B
HDL Fastening Unit B


Ref. No. Designation
5392720
Stud bolt M20 x 35 mm
5392775
U - washer , DIN 7349, outer Ø 44 mm
5392816
Hex. nut , DIN 985, self-locking, M 20
5394412
Rubber rope Ø 55 x 1 000 mm
top
Drill 433 K
For drilling through rubber materials (such as HDL Plates, REMASTEEL).
Ref. No. Designation
5394405
Drill 433 K, Ø 50 mm
top
REMASTEEL, rubber plates with metal backing
Properties

  • High resistance to wear with REMALINE 60 or REMALINE 70 material
  • Simple attachment of complete components
  • Easy replacement


   Area of application

  • Lining for high demands
  • Lining for chutes, material transfer points and truck bodies
REMASTEEL 60
REMALINE 60 anti-wear rubber on 3 mm or 5 mm ST-37 steel backing.
Ref. No. Designation Total thickness Dimensions (W x L) Sheet metal thickness Weight
5396609
REMASTEEL 6010 mm
1 000 x 2 000 mm
3 mm
69 kg
5396616
REMASTEEL 6015 mm
1 000 x 2 000 mm
3 mm
80 kg
5396623
REMASTEEL 6020 mm
1 000 x 2 000 mm
3 mm
90 kg
5396630
REMASTEEL 6025 mm
1 000 x 2 000 mm
3 mm
103 kg
5396647
REMASTEEL 6030 mm
1 000 x 2 000 mm
3 mm
114 kg
5396654
REMASTEEL 6040 mm
1 000 x 2 000 mm
3 mm
136 kg
5396661
REMASTEEL 6050 mm
1 000 x 2 000 mm
3 mm
159 kg
5396678
REMASTEEL 6060 mm
1 000 x 2 000 mm
5 mm
213 kg
5396685
REMASTEEL 6080 mm
1 000 x 2 000 mm
5 mm
258 kg
5396692
REMASTEEL 60100 mm
1 000 x 2 000 mm
5 mm
303 kg
top
REMASTEEL 70
REMALINE 70 anti-wear rubber on 3 mm or 5 mm ST-37 steel backing
Ref. No. Designation Total thickness Dimensions (W x L) Sheet metal thickness Weight
5396300
REMASTEEL 7010 mm
1 000 x 2 000 mm
3 mm
69 kg
5396317
REMASTEEL 7015 mm
1 000 x 2 000 mm
3 mm
80 kg
5396324
REMASTEEL 7020 mm
1 000 x 2 000 mm
3 mm
90 kg
5396331
REMASTEEL 7025 mm
1 000 x 2 000 mm
3 mm
103 kg
5396348
REMASTEEL 7030 mm
1 000 x 2 000 mm
3 mm
114 kg
5396355
REMASTEEL 7040 mm
1 000 x 2 000 mm
3 mm
136 kg
5396362
REMASTEEL 7050 mm
1 000 x 2 000 mm
3 mm
159 kg
5396379
REMASTEEL 7060 mm
1 000 x 2 000 mm
5 mm
213 kg
5396386
REMASTEEL 7080 mm
1 000 x 2 000 mm
5 mm
258 kg
5396393
REMASTEEL 70100 mm
1 000 x 2 000 mm
5 mm
313 kg
top
REMAMILL Mill lining
REMAMILL
Properties

  • Highly abrasion resistant REMAMILL 70 rubber (up to 70 °C)
  • Heat resistant REMAMILL 70 HR rubber (up to 90°C)


   Area of application

  • SAG mills
  • Ball mills
  • Pebble mills
  • Rod tube mills
  • Ceramic mills
  • Washing and slurry drums
  • Bark peeling drums
REMAMILL - Overview
REMAMILL mill lining lowers operating costs and increases productivity. The individual design of the lining, adapted to each customers needs, improves mill efficiency and output many times over and thereby significantly cuts energy costs. Highly wear-resistant elastomer materials lengthen service-life and reduce noise considerably.

Information on the various sizes and profile versions of all items is available on request.
A detailed questionnaire is included in the enclosures.


Lifter bars
  • Transport of grinding media and the material to be milled
  • Beveled for optimal cataract effect
  • Fastening of shell plates
  • Fastening profile made for the specific purpose of aluminium or steel


Shell plates
  • Wear protection for the mill shell
  • Fastening lips made of steel
  • Fixed by lifters


Head plates
  • Lining of the head or shell
  • Fastening lips made of steel
  • Fixed by lifters


Grate plate
  • Sifting of crushed material
  • Fastening lips made of steel
  • Fixed by lifters, self-centring chuck, pulp lifters and connecting profile


End profiles and filling segments
  • Transition between the shell and head lining
  • Multiple parts for easier installation


Discharger
  • Transport of milled material
  • Steel construction with high-quality vulcanised rubber wear protection


Center cone
  • Central material discharge element
  • Steel constructionl with high-quality vulcanised rubber wear protection


Manhole cover
  • Manhole cover with adapted lifter and shell plates
  • Form made of steel with high-quality vulcanised rubber wear protection
  • Adjusted lifters and shell plates screwed on manhole lid


TT - Fastening Unit
  • Consists of forged TT - bolts with washer, elastomer seal and self-locking nut


REMADUST Dust sealing systems
REMADUST dust sealing blankets
Properties

  • Highly elastic
  • High tear growth resistance
  • Good resistance to weather


   Area of application

  • Minimises problems with dust in screening machines, conveyor systems and other bulk materials transport installations
REMADUST 25
REMALINE 25 material
With textile grid pattern on both sides.
Hardness: 33 ± Shore A
 


Ref. No. Designation Hardness Dimensions colour
5494439
REMADUST 2533 ± 5 Shore A
2 x 1 350 x 20 000 mm
black
top
TT Rubber Grip Strips
  
TT Rubber Grip Strips
Fastener on  10 mm round steel. External Ø = 31 mm for clamping profiles: radius to center of groove is 55 mm.Clamping profile
Clamping profile


90° clamping profile, internal groove
90° clamping profile, internal groove


90° clamping profile, external groove
90° clamping profile, external groove


90° clamping profile, groove on bottom side
90° clamping profile, groove on bottom side


Clamping profile system
Clamping profile system


Ref. No. Designation Dimensions Bend angle capacity
5494446
TT Clamping Profile   35 m roll
5494453
TT 90° Corner Clamping Profile , Internal groove205 x 205 mm
90 °
 
5494460
TT 90° Corner Clamping Profile , External groove205 x 205 mm
90 °
 
5494477
TT 90° Corner Clamping Profile , Groove on underside205 x 205 mm
90 °
 
top
Products     |    Legal Indication     |    Imprint