|
|
OTR EM Special Tools for Tyre Handling and Regrooving Bead breakers, pumps and sealing rings | |
| Suitable for demounting and mounting EM tyres, also on the vehicle. The mounting set is used to press off the rings of multi-piece rims. For mounting, the breaking cylinder is put against the vehicle frame and the tyre is pressed off the rim by the rear flange ring. The mounting set can also be used in case of inflation problems. The flange ring is then pressed against the sealing ring/tyre bead until the tyre is sufficiently pressurized. |
| Art. Nr. | Product name | packing unit | | 5191581 | 
| EM mounting set
| 1 | | | |
| 5191550 | | Extension set
51" | 1 | | | |
| 5191567 | | Bead breaking cylinder
with adjusting spindle for inside breaking | 1 | | | |
| |
| This EM bead breaker (23" - 49") is suitable for EM tyres on 5-piece rims. Not damaging the beads, as the enormous force is not applied to the tyre, but to the lateral rings. In general the beads are pressed off on the vehicle, i.e. with the wheel not demounted. It is also possible to use the bead breaker on demounted wheels in the workshop. |
| Art. Nr. | Product name | Bead Breaking force
Bead Breaking force | Weight | packing unit | | 5191598 | 
| EM bead breaker STANDARD
| 500 bar
| 15 kg
| 1 | | | |
| |
| This EM bead breaker is suitable for EM tyres on 5-piece rims. Not damaging the beads, as the enormous force is not applied to the tyre, but to the lateral rings. In general the beads are pressed off on the vehicle, i.e. with the wheel not demounted. It is also possible to use the bead breaker on demounted wheels in the workshop. |
| Art. Nr. | Product name | Bead Breaking force
Bead Breaking force | Weight | packing unit | | 5191725 | 
| EM bead breaker GIGANT I
| 700 bar
| 30 kg
| 1 | | | |
| 5191677 | | EM bead breaker GIGANT II
| 700 bar
| 70 kg
| 1 | | | |
| 5191684 | | Carriage
| | | 1 | | | |
| 5586464 | | Counter-support
57" | | | 1 | | | |
| |
| Hydraulic claw breaker for breaking the beads on mounted or demounted wheels. |
| Art. Nr. | Product name | Bead Breaking force
Bead Breaking force | Weight | packing unit | | 5191574 | 
| Bead breaker tractor
| 500 bar
| 22 kg
| 1 | | | |
| 5191730 | 
| OTR EM bead breaker type 3
| 700 bar
| 23 kg
| 1 | | | |
| 5582650 | 
| support legs
new shape | | | 1 | | | |
| 5582620 | 
| Bead Breaking Jaw Type 3
up to 25" | | | 1 | | | |
| 5582630 | | Bead Breaking Jaw
standard, new | | | 1 | | | |
| 5582640 | 
| Bead Breaking Jaw short
up to 2" | | | 1 | | | |
| 5582660 | 
| Bead breaking jaw long
up to 3" | | | 1 | | | |
| |
| Hydraulic pumps for bead breakers. |
| Art. Nr. | Product name | Bead Breaking force
Bead Breaking force | packing unit | | 5191512 | 
| Hand/foot pump
hydraulic | 500 bar
| 1 | | | |
| 5191513 |
| Hand/foot pump
hydraulic | 700 bar
| 1 | | | |
| 5191529 | 
| Foot pump
air hydraulic | 500 bar
| 1 | | | |
| 5191520 |
| Foot pump
pneumatic-hydraulic | 700 bar
| 1 | | | |
| 5191691 | 
| Foot pump
pneumatic-hydraulic | 700 bar
| 1 | | | |
| |
| - O-rings: For sealing the tyre beads of graders, earth movers and other heavy OTR vehicles with split rims.
- V-rings: Ensure improved air seal where the tyre bead meets the rim and flange. They are of particular benefit to radial tyres on split rims.
|
| Art. Nr. | Product name | Nominal dia. | Dia. | packing unit | | 5632002 | | 'O' ring
| 17 inch
| 6.6 mm
| 1 | | | |
| 5632019 | | 'O' ring
| 20 inch
| 6.6 mm
| 1 | | | |
| 5632026 | | 'O' ring
| 24 inch
| 6.6 mm
| 1 | | | |
| 5931990 | | 'O' ring
thick | 24 inch
| 9.5 mm
| 1 | | | |
| 5632033 | | 'O' ring
thin | 25 inch
| 6.6 mm
| 1 | | | |
| 5632040 | | 'O' ring
thick | 25 inch
| 9.5 mm
| 1 | | | |
| 5632057 | | 'O' ring
| 29 inch
| 9.5 mm
| 1 | | | |
| 5632064 | | 'O' ring
| 33 inch
| 9.5 mm
| 1 | | | |
| 5632071 | | 'O' ring
| 35 inch
| 9.5 mm
| 1 | | | |
| 5632088 | | 'O' ring
| 39 inch
| 9.5 mm
| 1 | | | |
| 5632095 | | 'O' ring
| 45 inch
| 9.5 mm
| 1 | | | |
| 5632105 | | 'O' ring
| 49 inch
| 9.5 mm
| 1 | | | |
| 5632112 | | 'O' ring
| 51 inch
| 9.5 mm
| 1 | | | |
| 5632129 | | 'O' ring
extra thick | 51 inch
| 12.7 mm
| 1 | | | |
| 5632136 | | 'O' ring
| 57 inch
| 12.7 mm
| 1 | | | |
| 5632208 | | 'V' ring
| 20 inch
| | 1 | | | |
| 5632215 | | 'V' ring
| 24 inch
| | 1 | | | |
| 5632222 | | 'V' ring
| 25 inch
| | 1 | | | |
| 5632239 | | 'V' ring
| 29 inch
| | 1 | | | |
| 5632246 | | 'V' ring
| 33 inch
| | 1 | | | |
| 5632253 | | 'V' ring
| 35 inch
| | 1 | | | |
| 5632260 | | 'V' ring
| 39 inch
| | 1 | | | |
| 5632277 | | 'V' ring
| 45 inch
| | 1 | | | |
| 5632284 | | 'V' ring
| 49 inch
| | 1 | | | |
| 5632291 | | 'V' ring
| 51 inch
| | 1 | | | |
| 5632301 | | 'V' ring
| 57 inch
| | 1 | | | |
 Tyre spreaders
| Art. Nr. | Product name | Electric power/connection | Length | W | packing unit | | 5953004 | 
| Tyre inspection lamp
includes location holder | 220/8 V/W
| | | 1 | | | |
| 5953028 | | Tyre inspection lamp
without holder | 220/8 V/W
| | | 1 | | | |
| 5174522 | 
| Halogen lamp
magnetic | 230/12 V/W
| | | 1 | | | |
| 5719520 | | Working light OPUS I
| | | | 1 | | | |
| 5940910 | | Flexarm 500 magnetic clamp OPUS I
| | 500 mm
| | 1 | | | |
| 5719740 | 
| Working Light-Master 2
| 230 / 50 V/Hz
| | 2 x 24
| 1 | | | |
| 5719750 | 
| Working light OPUS 2
with power socket | 230/50 V/W
| | 2 x 24
| 1 | | | |
| 5953011 | | Holder
| | | | 1 | | | |
| 5174539 | | Spare lamp
12 V | | | | 1 | | | |
| 5719760 | | Spare lamp
24W | | | | 1 | | | |
| |
| For preparing the inspection and repair of tractor, truck, EM/OTR and industrial tyres and for the changing of tubes and flaps as well as for similar work. Extremely low roll-on height (200 mm), spreader cylinder with hand and foot control. Enough space for the feet to be safe from injury. Pneumatic system lifts the tyre to the desired working height. Pneumatically controlled opening of the spreader claws. The machine is designed for one-man operation. |
| Art. Nr. | Product name | packing unit | | 5199150 | | Tyre lift spreader
| 1 | | | |
| 5199198 | 
| Tyre lift spreader SUPER
| 1 | | | |
| 5199167 | | Set of EM extensions
up to 23.5R25 | 1 | | | |
| 5190050 | | CAMOZZI Valve
| 1 | | | |
| 5190040 | | Maintanance Unit GORGES
| 1 | | | |
| Art. Nr. | Product name | packing unit | | 5199222 | 
| EM tyre spreader
with clamping mechanism | 1 | | | |
| 5199181 | 
| EM bead spreader
hydraulic | 1 | | | |
| 5199239 | 
| Spreader bars, EM
| 1 | | | |
Regrooving / Hot Cutter | |
| Special thermal cutting tool for quick and easy removal of inner liners or old repair patches of any type, including steel-reinforced patches. Easier handling thanks to additional handle. |
| Art. Nr. | Product name | Cutting width | Blade length | Cutting depth | packing unit | capacity[unit] | | 5641206 | 
| HOT CUTTER
| 21 mm
| 10 mm
| | 1 | | | | |
| 5641213 | | HOT CUTTER
(US version) | 21 mm
| 10 mm
| | 1 | | | | |
| 5641251 | | HOT CUTTER blade type 1
| 21 mm
| | 10 mm
| 1 | 10 | | | |
| |
| Ergonomic design of the handle makes working easier. Switch control with up to 8 positions, for high cutting intensity. Automatic overheating cutout according to DIN 30600. Insulated cutting head.
The compact regrooving tool containing all components in the handle. Excellent as a spare tool or for shops requiring a regroover only occasionally. Cutting width with FIX regrooving blades 3 - 28 mm. Integrated transformer with 2-step cutting capacity, easy handling. |
| Art. Nr. | Product name | Voltage | packing unit | | 5641000 | | RUBBER CUT 300
115V | 115 V
| 1 | | | |
| 5641017 | 
| RUBBER CUT 300
220/240V | 220/240 V
| 1 | | | |
| |
| The TYRE CUTTER 300 (TC 300) is the successor of the proven RC 300 regroover (564 1000).
For regrooving all tread patterns on commercial vehicle tyres.
4-step temperature switch on the main transformer for different cutting speeds
Handle with separate transformer enables fatigue-free handling.
Thin connection cable for optimum movability of the handle
- the most modern safety technology with all approval seals
- The proven range of R-Fix and W-Fix series cutting blades from 3 to 28 mm can be used. |
| Art. Nr. | Product name | packing unit | | 5641170 | | Tyre Cutter 300
115V-US Version | 1 | | | |
| 5641180 | 
| Tyre Cutter 300
230V | 1 | | | |
| 5641190 | | Tyre Cutter 300
240V-UK version | 1 | | | |
| |
| Ergonomic design of the handle makes working easier. Switch control with up to 8 positions, for high cutting intensity. Automatic overheating cutout according to DIN 30600.
Insulated cutting head. Allows fast and accurate regrooving of the tread. More freedom of movement and easy guiding due to separation of handle and transformer. Cutting width with FIX regrooving blades 3 - 28 mm; prepared for wall mounting; lockable carrying handle; GS-tested, meets recognized safety standards. |
| Art. Nr. | Product name | Voltage | packing unit | | 5641103 | | RUBBER CUT 400
115V | 115 V
| 1 | | | |
| 5641110 | 
| RUBBER CUT 400
220/240V | 220/240 V
| 1 | | | |
| 5641127 | | RUBBER CUT 400
240 V (UK version) | 240 V
| 1 | | | |
| 5641165 | | RUBBER CUT 400-R
220/240V | 240 V
| 1 | | | |
| |
| R Fix = round blade, W Fix = angle blade. |
| Art. Nr. | Product name | Cutting width | Cutting depth | capacity[unit] | packing unit | | 5642803 | | R Fix 1
| 3 - 4 mm
| max. 7 mm
| 20 | 1 | | | |
| 5642810 | | R Fix 2
| 5 - 6 mm
| max. 8 mm
| 20 | 1 | | | |
| 5642827 | | R Fix 3
| 6 - 8 mm
| max. 10 mm
| 20 | 1 | | | |
| 5642834 | 
| R Fix 4
| 9 - 10 mm
| max. 14 mm
| 20 | 1 | | | |
| 5642841 | | R Fix 5
| 10 - 14 mm
| max. 16 mm
| 20 | 1 | | | |
| 5642858 | | W Fix 1
| 3 - 4 mm
| max. 7 mm
| 20 | 1 | | | |
| 5642865 | | W Fix 2
| 5 - 6 mm
| max. 8 mm
| 20 | 1 | | | |
| 5642872 | | W Fix 3
| 6 - 8 mm
| max. 10 mm
| 20 | 1 | | | |
| 5642889 | 
| W Fix 4
| 9 - 10 mm
| max. 14 mm
| 20 | 1 | | | |
| 5642896 | | W Fix 5
| 10 - 14 mm
| max. 16 mm
| 20 | 1 | | | |
| 5642906 | | W Fix 6
| 22 - 28 mm
| max. 16 mm
| 10 | 1 | | | |
| Art. Nr. | Product name | Weight | packing unit | | 5641020 | 
| Gauge
for setting the cutting depth | 25 g
| 1 | | | |
| 5640946 | 
| RC cutting head complete
| | | | | |
| 5640850 | 
| RC cutting head complete
with rollers | | | | | |
| 5640953 | 
| RC cutting head clamping jaws
| | | | | |
| 5640960 | 
| RC Allen wrench hexagon
| | | | | |
| 5640939 | 
| RC cable for cutting head
2.5 m | | | | | |
| 5640908 | 
| RC-pistol-handle complete
with cable for cutting head | | | | | |
| 5640915 | 
| RC half of handle Set
with screws | | | | | |
| 5640922 | 
| RC transformer housing
with bottom plate | | | | | |
| 5640939 | 
| RC-cable for cutting head
2.5 m | | | | | |
| |
| Tool stand and gauge for easy regrooving of truck tyres (17.5" -24.5").
- Tyres can be regrooved on or off their rims
- Efficient working and loading/unloading of the tyres
- Low space requirement, secure holding of tyres
- Integrated setting gauge
- One roller is equipped with a brake preventing accidental tyre rotation
- Equipped with 2 castors, can be moved around in the workshop
- Rubber Cut tool not included in the delivery
|
| Art. Nr. | Product name | packing unit | | 5183719 | 
| RUBBER CUT STATION ECO
| 1 | | | |
|
